Quick Instructions
Step 1
Place the battery in the bottom compartment and rotate it until it locks in place.Charge for 3.5 hours before each use. Full charge when the adapter LED turns green.
STEP 2
STEP 3
Place the shisha tobacco in the glassbowl,insert it into the ceramic container,Attach the heater, and gently rotate ituntil it locks in place.
STEP 4
Press the power button for 3 seconds toturn on the device.Smoking session starts after 300-second waiting(Auto Mode). If you want,Press both left and right buttons to switch to manual mode for more flexible power control.
STEP 5
Hold right button 3s to switch lighting modes.
STEP 6
Enjoy. After 15 minutes, you should lower the power to H1-H2 extend your session.
Warning
Do not wash the device with water. Use wet wipes for the exterior and a brush for internal pipes.
